Topic: MY 2.0 16V AKA 9AFE Build (7 Days)

Hi

Due to my bad luck and shitty timing, I now have the opportunity to rebuild my motor with a time frame of 7 days. So I’ve decided to do the infamous 2.0 16V AKA 9afe build. The cylinder head will be a stock 7afe piece, with a mild port and polish. The reason for staying with the stock head is the time frame and future plans are to upgrade to 20V next year sometime. Motor has already been stripped down.

Things which need to be done.

1>    Polish conrods (Myself)
2>    Polish crankshaft (Myself)
3>    Bush small ends (engineers)
4>    Offset grind crankshaft (engineers)
5>    Dowel flywheel (engineers)
6>    Balance crankshaft, pulley, sprocket, rods, pistons & flywheel (engineers)
7>    Port and polish cylinder head + Gasket match (Myself)
8>    Polish intake manifold + gasket match (Myself)
9>    Replace valve stem seals (Myself)

Today’s task polish rods and crankshaft,

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

soudns exciting. good luck.

http://farm4.static.flickr.com/3085/2572061569_20ca32b3cb.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Just finished with rods and crank shaft. Soaking overnight should be brand new in the morning. TIP: soak oiled or stained parts in boiling water using washing powder. works like a dream.

Tomorrow's task strip head and intake manifold. Polish intake and soak with head overnight.

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

and is the build completed now?

2006 RunX RSi (current)
1998 Civic VTec (ex)
2000 Corolla RXi (ex)

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Not yet completed waiting on engineering work, Engineers just very busy I wont push them dont want them to over look anything. will keep you updated. should be another week to completion

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

post up some pics as well man

For all your digital requirements/supplies..pc (hardware/software),tv,carmeras,printers,ect..
contact 072 056 7379 or mail jrc20v@gmail.com  t&c apply

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Are u reshaping the conrods or did u cut on the block??

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

going to shave the block, also have changed to H BEAM rods got a good deal on them

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

nice very nice...
When the project is done, remember its like driving a brand new car...
So it will take almost 6months before u get the true effect;)

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

True dat. i always run my motors in for about 6000km then i punish it for making me wait so long

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

lol
I just got home now from runing in a motor...
Only managed 350kms...
Work later or rather just now...
B18B
5th gear 6000RPM:| Cant wait to redline her in 5th:P

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

due to the engineer being ill the project has been delayed but hopefully back on track will update tomorrow

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

last nyt i almost put a 9age in my bakkie...
Hope that blerie engineer gets better soon ../../extensions/custom_smilies_2/img1/wink

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Nice build.. Just 1 question guys. Can a 9age rev like a 4age and stroking da 7afe 2 1990cc. Wont this cause problems? Like cylinder wall cracking?

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

it wont rev as high as the 4age but is more torquer @ higher revs.
The block wont crack if ur measurements are spot on

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

If you use the right internals than theres no reason why she won't rev up there has always been a myth about the 7a being week. but like i said just a myth. people that have failed never tell you of the short cuts or inferior parts they use, neither do they tell you about the driver errors.

Back to the build, hoping to have all the bits back by next friday.

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Thanx 4 helping guys.. Lol! One day when I'm big, I'll send teamcam da 4age head and 7afe block with a bag full of money. So he can work his magic on it;)

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

ME? what must i do with ur 4age head? hahaha im no tuner dude LOL

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Build me a b20 killer:lol:. Guys can u please tell me more about this. Do u stroke da 7afe to 1990cc and what internals, etc is needed?

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

u stroke the 7afe block to a 1998cc motor. U do this by purchasing a stroker kit...
This is a crank, conrods, pistons... could set u bad around 10k

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Does ur mechie stock da kit already buddy or can u get hold of it? U say it's a reliable build? I would really like something like this.. Will da stroker kit up the compression of da 7afe? Would be great if the comp stay at 9.5:1. Then one can up it 2 around 11.5:1 with hectic 20v head:D

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

it's going to pick up the CR but thats a good thing.

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

Guys approximately what power figures can be expected from this build? Will it be competition for other 2.0i cars like B20, C20xe, etc? I'm falling inlove with da build:D

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

my mechs 9age hd a drastic death but the new 1 is still going good. its currently still running in some kilos...
His 1st 9age made over 130kw 181nm & still going strong. Ran a time of 14.5 then his son slipped a gear & yah u can guess what happened next...
He can make up the kit for but 1st have to deposit a certain amount in2 his account so that he knows u not waisting his time...

Last edited by teamcam (2009-06-15 18:54:16)

180BHP 165NM
1400 vvt 13.9--> 400m 10/03/2012
Built by Ebrahim Shabudien
Tuned by Nazeem Sirkhotte

http://i97.photobucket.com/albums/l221/mureed/20motor.jpg
http://i97.photobucket.com/albums/l221/mureed/NissanChamp.gif

Re: MY 2.0 16V AKA 9AFE Build (7 Days)

I bet your mechie is my engineer. P.E.:D

Regards,
SaintGP
----------------------------------------------------------------------------
If It Dos'nt Say Toyota It's Not Worth It
http://i250.photobucket.com/albums/gg261/SaintGP/aa.jpg